Suzuki Forum

Suzuki For You

need to know valve lash clearance for K6ATurbo 64h.p.

The 1991-1997 Suzuki Cappuccino. Suzuki's diminutive, turbo-charged, hard top convertible.

Moderators: ClubCappo, wade, IanL

need to know valve lash clearance for K6ATurbo 64h.p.

Postby petruchcho » Wed Sep 16, 2009 7:12 am

Hello everyone, I am sorry for my English - I am from Russia.
I need to know valve lash clearance for K6ATurbo 64h.p. In Russia we have no any information about K6A engine.
I know that intake clearance is 0.18mm-0.23mm and i dont know is the exhaust clearance the same or it is 0.30-0.35mm. If anybody have any information please answer to me here, or put the message on my mail([email protected]).

If any body have book of James Danko "K6A engine overhaul manual" please, send it to my mail.
petruchcho
Newbie
 
Posts: 6
Joined: Wed Sep 16, 2009 6:49 am

Postby ClubCappo » Wed Sep 16, 2009 9:44 pm

I'll ask around the K6A owners and see if they have the info. Ian might beat me to it though :wink:

Andy
ClubCappo - The home of the Cappuccino Owners Club

www.clubcappo.co.uk
ClubCappo
Addicted
 
Posts: 470
Joined: Fri Feb 03, 2006 6:18 pm
Location: South Yorkshire

Postby petruchcho » Sat Sep 19, 2009 4:30 am

Thank you! It is very kind. May be you know, has any body in jimny forum JB23W jimny? It has the same engine.
petruchcho
Newbie
 
Posts: 6
Joined: Wed Sep 16, 2009 6:49 am


Return to Suzuki Cappuccino

Who is online

Users browsing this forum: No registered users and 1 guest