Suzuki Forum

Suzuki For You

Exclusive Low Rates on Car Finance. Buy your car from any dealer. Apply with Carfinance247.

need to know valve lash clearance for K6ATurbo 64h.p.

The 1991-1997 Suzuki Cappuccino. Suzuki's diminutive, turbo-charged, hard top convertible.

Moderators: ClubCappo, wade, IanL

need to know valve lash clearance for K6ATurbo 64h.p.

Postby petruchcho » Wed Sep 16, 2009 7:12 am

Hello everyone, I am sorry for my English - I am from Russia.
I need to know valve lash clearance for K6ATurbo 64h.p. In Russia we have no any information about K6A engine.
I know that intake clearance is 0.18mm-0.23mm and i dont know is the exhaust clearance the same or it is 0.30-0.35mm. If anybody have any information please answer to me here, or put the message on my mail([email protected]).

If any body have book of James Danko "K6A engine overhaul manual" please, send it to my mail.
petruchcho
Newbie
 
Posts: 6
Joined: Wed Sep 16, 2009 6:49 am

Postby ClubCappo » Wed Sep 16, 2009 9:44 pm

I'll ask around the K6A owners and see if they have the info. Ian might beat me to it though :wink:

Andy
ClubCappo - The home of the Cappuccino Owners Club

www.clubcappo.co.uk
ClubCappo
Addicted
 
Posts: 470
Joined: Fri Feb 03, 2006 6:18 pm
Location: South Yorkshire

Postby petruchcho » Sat Sep 19, 2009 4:30 am

Thank you! It is very kind. May be you know, has any body in jimny forum JB23W jimny? It has the same engine.
petruchcho
Newbie
 
Posts: 6
Joined: Wed Sep 16, 2009 6:49 am


Return to Suzuki Cappuccino

Who is online

Users browsing this forum: No registered users and 1 guest

cron